How to Maintain Your Robot Vacuum Cleaner?

APRIL 27, 2023

When you purchase a robotic vacuum cleaner, you can enjoy the convenience and comfort it brings. However, many people overlook the importance of maintenance, which can lead to decreased performance and ultimately render the machine useless. In this article, we will explain how to maintain a robot vacuum cleaner to ensure it can maintain its efficient cleaning ability for a long time.

Before we begin, it's important to note that different robot vacuum cleaners have different maintenance requirements. Therefore, before performing any maintenance operations, be sure to read the product manual to obtain accurate guidance.

Now, let's dive into how to maintain a robot vacuum cleaner in detail.

Cleaning the Robot:

Cleaning the robot is key to maintaining its performance. After each use, make sure to thoroughly clean the robot, including its various parts such as the brushes and dustbin. When cleaning, pay attention to the following points:

  • First, ensure that the robot is turned off and disconnected from the charger. Then, use a clean cloth or brush to clean the brushes and dustbin. If necessary, you can use some clean water to rinse them. Note that the brushes and dustbin should not be soaked in water.
  • Second, clean the robot's sensors. These sensors are usually located on the bottom and sides of the robot. Use a clean cloth or brush to clean them, making sure they are not affected by any dust or dirt.
  • Finally, clean the bottom of the robot. Use a clean cloth or brush to clean it, making sure it is not attached to any dust or dirt. This will ensure that the robot can work properly the next time it is used.

Replacing Parts:

Some parts of the vacuum cleaner need to be replaced regularly to maintain its performance. These parts include brushes, filters, and batteries. Before replacing these parts, be sure to read the product manual to learn the correct replacement methods.

The brushes usually need to be replaced every 6 months. If your robot is used frequently, you can replace it more frequently. The filter needs to be replaced every 2-3 months. This will ensure that the robot can filter out more dust and dirt, and maintain its cleaning effect. The battery life is usually 2-3 years, and when replacing it, be sure to use the same model as the original battery.

Replacing parts may require some professional skills. If you are unsure how to replace them, please contact the after-sales service center for assistance.

Maintaining the Robot:

Maintaining the robot is the best way to ensure its performance. This includes regularly checking the robot to ensure that all its parts are in good condition. If you find any problems, please contact the after-sales service center immediately for assistance.

In addition, make sure that the robot's charger stays dry during use, and avoid using a damaged power cord. This will ensure that the robot's battery is fully charged and can maintain its battery life for a long time.

Finally, do not let the robot sit unused for too long. If you don't plan to use the robot for a period of time, make sure to store it in a dry place and charge it at least once to maintain its battery status.


Maintaining a robotic vacuum cleaner is not difficult, but it requires patience and attention to detail. Be sure to regularly clean the robot, replace the parts that need to be replaced, and maintain the robot. This will ensure that your vacuum cleaner can maintain its efficient cleaning ability for a long time, bringing more cleaning and convenience to your life.

Lydsto W2 5000Pa Robot Vacuum & Mop

  • 5000Pa strong suction power, 4 suction levels
  • 50°C hot water automatic mop cleaning, automatic dust collection
  • 60°C hot air drying, preventing any unpleasant odors from the mop
  • Silver ion and ozone sterilization and odor removal
  • 4L clean water tank + 4L dirty water tank + 3L dust bag
  • LDS navigation for automatic route planning
  • Compatible with MIJIA APP
Learn More >